 idVendor: 0x096E
  iManufacturer: Feitian
 idProduct: 0x060D
  iProduct: R502
 bcdDevice: 3.47 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: R502 Contactless Reader
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.00
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0002
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: No such file or directory
  dwDataRate: 10752 bps
  dwMaxDataRate: 688172 bps
  bNumDataRatesSupported: 44
   IFD does not support GET_DATA_RATES request: No such file or directory
  dwMaxIFSD: 252
  dwSynchProtocols: 0x00000007
   2-wire protocol
   3-wire protocol
   I2C protocol
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000404BE
   ....02 Automatic parameter configuration based on ATR data
   ....04 Automatic activation of ICC on inserting
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..04.. Automatic IFSD exchange as first exchange (T=1)
   04.... Short and Extended APDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x096E
  iManufacturer: Feitian
 idProduct: 0x060D
  iProduct: R502
 bcdDevice: 3.47 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 1
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: R502 Contact Reader
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.00
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: No such file or directory
  dwDataRate: 10752 bps
  dwMaxDataRate: 688172 bps
  bNumDataRatesSupported: 44
   IFD does not support GET_DATA_RATES request: No such file or directory
  dwMaxIFSD: 252
  dwSynchProtocols: 0x00000007
   2-wire protocol
   3-wire protocol
   I2C protocol
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000102B8
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x096E
  iManufacturer: Feitian
 idProduct: 0x060D
  iProduct: R502
 bcdDevice: 3.47 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 2
 bAlternateSetting: 0
 bNumEndpoints: 2
  bulk-IN and bulk-OUT
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: R502 SAM1 Reader
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.00
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: No such file or directory
  dwDataRate: 10752 bps
  dwMaxDataRate: 688172 bps
  bNumDataRatesSupported: 44
   IFD does not support GET_DATA_RATES request: No such file or directory
  dwMaxIFSD: 252
  dwSynchProtocols: 0x00000007
   2-wire protocol
   3-wire protocol
   I2C protocol
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000102B8
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
 idVendor: 0x096E
  iManufacturer: Feitian
 idProduct: 0x060D
  iProduct: R502
 bcdDevice: 3.47 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 3
 bAlternateSetting: 0
 bNumEndpoints: 2
  bulk-IN and bulk-OUT
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: R502 SAM2 Reader
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.00
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x07
   5.0V
   3.0V
   1.8V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.000 MHz
  dwMaximumClock: 4.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   IFD does not support GET CLOCK FREQUENCIES request: No such file or directory
  dwDataRate: 10752 bps
  dwMaxDataRate: 688172 bps
  bNumDataRatesSupported: 44
   IFD does not support GET_DATA_RATES request: No such file or directory
  dwMaxIFSD: 252
  dwSynchProtocols: 0x00000007
   2-wire protocol
   3-wire protocol
   I2C protocol
  dwMechanical: 0x00000000
   No special characteristics
  dwFeatures: 0x000102B8
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   ..02.. NAD value other than 00 accepted (T=1)
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x00
  bMaxCCIDBusySlots: 1
